Test Bug: [EIM] Wrong Item Visualization in SYCON.net Ethernet/IP Scanner DTM Extended Diagnosis

Test Description:
Check, if Diagnosis page can be accessed and is filled with valid information

Bug Description from Tester:

Wrong item visualization observed in Ethernet/IP Scanner DTM Extended Diagnosis. /see the screen-shot attached below/

Steps to reproduce:

1. Start SYCON.net on the test PC.
2. Place CIFX RE/EIM DTM on the root line.
3. Select CIFX Device Driver in Ethernet/IP Scanner DTM and open Device Assignment page.
4. Assign proper hardware device and then download Ethernet/IP Scanner firmware V2.8.0.2
5. Download configuration with default DTM values to device.
6. Open device diagnosis in Ethernet/IP Scanner Master DTM.
7. Go to Extended Diagnosis --> EIM_AP_TASK and select last but one item.

Expected result:

This item and its diagnostic information to have readable text description.

Actual result:

This item name is coded as "Struct_1342". Its task names are coded as "Element_0, ...."