| Test Step | Description | Result |
|---|---|---|
| InitializeRoutine | PASS | |
| |―InitializeInterfacesEmulated | Using input DUT IP of 192.168.1.10 and MAC of 0002A2596EBD. | PASS |
| |―SelectTests | Selected I/O connection ExlusiveOwner for the DUT. DUT is not supervisor capable. | PASS |
| |―TestCleanup | Disabled Emulated Main Supervisor at 192.168.1.223. Disabled Emulated Backup Supervisor at 192.168.1.111. | PASS |
| |―Setup Diagram | PASS | |
| MainRoutine | FAIL | |
| |―1 - DLR Object Attributes | FAIL | |
| |―――1.1 - DUT Ring Normal and Linear Normal | PASS | |
| |―――――Start Capture | PASS | |
| |―――――Main Supervisor Disable | Disabled Emulated Main Supervisor. | PASS |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Linear (0) and Normal (0) | Network Topology = 0, DLR Network Status = 0, Active Supervisor Address = 0.0.0.0, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Main Supervisor Disable | Disabled Emulated Main Supervisor. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Linear (0) and Normal (0) | Network Topology = 0, DLR Network Status = 0, Active Supervisor Address = 0.0.0.0, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_1_1_RingNormal.pcapng | PASS |
| |―――1.2 - DUT Ring Fault (Beacon State) | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Set Supervisor Ring State to Fault | Set Emulated Main Supervisor Ring State to Fault. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Fault (1) | Network Topology = 1, DLR Network Status = 1, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Set Supervisor Ring State to Normal | Set Emulated Main Supervisor Ring State to Normal. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_1_2_RingFault.pcapng | PASS |
| |―――1.3 - DUT Ring Fault (Emulated Port 1 Closed) | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Block Emulated Port 1 | Blocked Emulated Port 1 at Main Supervisor Sequence ID 0x89A. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Fault (1) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | FAIL |
| |―――――Unblock Emulated Port 1 | Unblocked Emulated Port 1 at Main Supervisor Sequence ID 0x8AD. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_1_3_EmulatedPort1Closed.pcapng | PASS |
| |―――1.4 - DUT Ring Fault (Emulated Port 2 Closed) | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Block Emulated Port 2 | Blocked Emulated Port 2 at Main Supervisor Sequence ID 0x908. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Fault (1) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | FAIL |
| |―――――Unblock Emulated Port 2 | Unblocked Emulated Port 2 at Main Supervisor Sequence ID 0x91B. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_1_4_EmulatedPort2Closed.pcapng | PASS |
| |―――1.5 Active Supervisor Change | PASS | |
| |―――――Start Capture | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Backup Supervisor Disable | Disabled Emulated Backup Supervisor. | PASS |
| |―――――Wait 2s | 2000ms | PASS |
| |―――――VerifyRingState - Ring (1), Normal (0), Active Main | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Main Supervisor Disable | Disabled Emulated Main Supervisor. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――Set Backup Precedence 255 | Set Emulated Backup Supervisor Precedence to 255. | PASS |
| |―――――Backup Supervisor Enable | Enabled Emulated Backup Supervisor. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1), Normal (0), Active Backup | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.111, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Backup Supervisor Disable | Disabled Emulated Backup Supervisor. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1), Normal (0), Active Main | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_1_5_ActiveSupervisorChange.pcapng | PASS |
| |―2 - Sign_on Operations | FAIL | |
| |―――2.1 - Sign_on Frame - Minimum | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――SendSignOn | Sent Sign-On. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_2_1_SignOnMin.pcapng | PASS |
| |―――――AnalyzeResults | PASS | |
| |―――――――Sign_on Analysis | Sign_on frame located with a final entry count of 2. DUT added MAC Address 0002A2596EBD, IP Address 192.168.1.10 to the Sign_on frame. | Test Note |
| |―――――――Sign_on Analysis | Sign_on frame group 0x9CC with 1 nodes analyzed successfully. | Test Note |
| |―――2.2 - Sign_on Frame - Populated | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――SendSignOn | Sent Sign-On with 48 additional entries. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_2_2_SignOnPopulated.pcapng | PASS |
| |―――――AnalyzeResults | PASS | |
| |―――――――Sign_on Analysis | Sign_on frame located with a final entry count of 50. DUT added MAC Address 0002A2596EBD, IP Address 192.168.1.10 to the Sign_on frame. | Test Note |
| |―――――――Sign_on Analysis | Sign_on frame group 0xA13 with 49 nodes analyzed successfully. | Test Note |
| |―――2.3 - Sign_on Frame - Overflow | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――Start Capture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――SendSignOn - 50 | Sent Sign-On with 49 additional entries. | PASS |
| |―――――SendSignOn - 147 | Sent Sign-On with 146 additional entries. | PASS |
| |―――――SendSignOn - 148 | Sent Sign-On with 147 additional entries. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_2_3_SignOnOverflow.pcapng | PASS |
| |―――――Analyze Sign_on 50 Count Results | PASS | |
| |―――――――Sign_on Analysis | Sign_on frame located with a final entry count of 51. DUT added MAC Address 0002A2596EBD, IP Address 192.168.1.10 to the Sign_on frame. | Test Note |
| |―――――――Sign_on Analysis | Sign_on frame group 0xA59 with 50 nodes analyzed successfully. | Test Note |
| |―――――Analyze Sign_on 147 Count Results | PASS | |
| |―――――――Sign_on Analysis | Sign_on frame located with a final entry count of 148. DUT added MAC Address 0002A2596EBD, IP Address 192.168.1.10 to the Sign_on frame. | Test Note |
| |―――――――Sign_on Analysis | Sign_on frame group 0xA5C with 147 nodes analyzed successfully. | Test Note |
| |―――――Analyze Sign_on Overflow (148 Count) Results | FAIL | |
| |―――――――Sign_on Error | Error - Observed 1 Sign_on frames for Sequence ID 0xA5D; Expected at least 2 Sign_on frames. | FAIL |
| |―――――Analyze Sign_on Unicast Results | FAIL | |
| |―――――――Sign_on Error | Error - No Sign_on frame group found with 1 nodes. | FAIL |
| |―3 - DLR Fault Response | FAIL | |
| |―――3.1 - DUT Port 1 Link Lost (Cable A) | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Disable Port 1 (Link Lost) | Disabled Port 1 at Main Supervisor Sequence ID 0xAA6 and set Ring State to RING_FAULT. | PASS |
| |―――――VerifyRingState - Ring (1) and Fault (1) | Network Topology = 1, DLR Network Status = 1, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Send Locate_Fault | Sent Locate_Fault | PASS |
| |―――――Enable Port 1 | Enabled Port 1 at Main Supervisor Sequence ID 0xB2C and set Ring State to RING_NORMAL. | PASS |
| |―――――Wait 5s | 5000ms | PASS |
| |―――――WaitForRingNormal | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, duration of 106ms from step start. | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_1_CableA.pcapng | PASS |
| |―――――AnalyzeResults | FAIL | |
| |―――――――Link_Status Frames | Error - Observed 1 Link_Status frames sent by the DUT; Expected at least 2 Link_Status frames. | FAIL |
| |―――――――Status | All Link_Status frames have Status = 0x02. | Test Note |
| |―――――――Reserve Bytes | All reserved field pad bytes are zero. | Test Note |
| |―――――TestCleanup | Disabled Emulated Main Supervisor at 192.168.1.223. Disabled Emulated Backup Supervisor at 192.168.1.111. | PASS |
| |―――3.2 - DUT Port 2 Link Lost (Cable B) | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Disable Port 2 (Link Lost) | Disabled Port 2 at Main Supervisor Sequence ID 0xC65 and set Ring State to RING_FAULT. | PASS |
| |―――――VerifyRingState - Ring (1) and Fault (1) | Network Topology = 1, DLR Network Status = 1, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Send Locate_Fault | Sent Locate_Fault | PASS |
| |―――――Enable Port 2 | Enabled Port 2 at Main Supervisor Sequence ID 0xCE9 and set Ring State to RING_NORMAL. | PASS |
| |―――――Wait 5s | 5000ms | PASS |
| |―――――WaitForRingNormal | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, duration of 109ms from step start. | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_2_CableB.pcapng | PASS |
| |―――――AnalyzeResults | FAIL | |
| |―――――――Link_Status Frames | Error - Observed 1 Link_Status frames sent by the DUT; Expected at least 2 Link_Status frames. | FAIL |
| |―――――――Status | All Link_Status frames have Status = 0x01. | Test Note |
| |―――――――Reserve Bytes | All reserved field pad bytes are zero. | Test Note |
| |―――――TestCleanup | Disabled Emulated Main Supervisor at 192.168.1.223. Disabled Emulated Backup Supervisor at 192.168.1.111. | PASS |
| |―――3.3 - DUT Locate_Fault Response, Emulated Port 1 Down (Cable C) | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Block Emulated Port 1 | Blocked Emulated Port 1 at Main Supervisor Sequence ID 0xE11. | PASS |
| |―――――Set Supervisor Ring State to Fault | Set Emulated Main Supervisor Ring State to Fault. | PASS |
| |―――――Wait 100ms | 100ms | PASS |
| |―――――SendLocateFault | Sent Locate_Fault | PASS |
| |―――――SendNeighborCheckRequest | Sent Neighbor_Check_Request out both ports. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――Unblock Emulated Port 1 | Unblocked Emulated Port 1 at Main Supervisor Sequence ID 0xE28. | PASS |
| |―――――Set Supervisor Ring State to Normal | Set Emulated Main Supervisor Ring State to Normal. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_3_CableC.pcapng | PASS |
| |―――――AnalyzeResults | PASS | |
| |―――――――Status | All Neighbor_Status frames have Status = 0x82. | Test Note |
| |―――――――Reserve Bytes | All reserved field pad bytes are zero. | Test Note |
| |―――――――Neighbor_Check_Request | Observed 1 groups of Neighbor_Check_Request frames which matches expectations of 1 groups of Neighbor_Check_Request frames corresponding to each disconnect. | Test Note |
| |―――――――Neighbor_Check_Request | All Neighbor_Check_Request frames sent within 100ms (10% tolerance) of each other. | Test Note |
| |―――――――Neighbor_Status | Observed 1 groups of Neighbor_Status frames which matches expectations of 1 groups of Neighbor_Status frames corresponding to each disconnect. | Test Note |
| |―――――――Neighbor_Check_Response | All Neighbor_Check_Response frames (Count: 1) matched with Neighbor_Check_Request frames. | Test Note |
| |―――3.4 - DUT Locate_Fault Response, Emulated Port 2 Down (Cable D) | FAIL | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Block Emulated Port 2 | Blocked Emulated Port 2 at Main Supervisor Sequence ID 0xE72. | PASS |
| |―――――Set Supervisor Ring State to Fault | Set Emulated Main Supervisor Ring State to Fault. | PASS |
| |―――――Wait 100ms | 100ms | PASS |
| |―――――SendLocateFault | Sent Locate_Fault | PASS |
| |―――――SendNeighborCheckRequest | Sent Neighbor_Check_Request out both ports. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――Unblock Emulated Port 2 | Unblocked Emulated Port 2 at Main Supervisor Sequence ID 0xE89. | PASS |
| |―――――Set Supervisor Ring State to Normal | Set Emulated Main Supervisor Ring State to Normal. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_4_CableD.pcapng | PASS |
| |―――――AnalyzeResults | FAIL | |
| |―――――――Status | All Neighbor_Status frames have Status = 0x81. | Test Note |
| |―――――――Reserve Bytes | All reserved field pad bytes are zero. | Test Note |
| |―――――――Neighbor_Check_Request | Observed 1 groups of Neighbor_Check_Request frames which matches expectations of 1 groups of Neighbor_Check_Request frames corresponding to each disconnect. | Test Note |
| |―――――――Neighbor_Check_Request Frames | Error - Observed 2 Neighbor_Check_Request frames in group starting at Sequence ID 0xC; Expected 3 Neighbor_Check_Request frames. | FAIL |
| |―――――――Neighbor_Status | Observed 1 groups of Neighbor_Status frames which matches expectations of 1 groups of Neighbor_Status frames corresponding to each disconnect. | Test Note |
| |―――――――Neighbor_Check_Response | All Neighbor_Check_Response frames (Count: 1) matched with Neighbor_Check_Request frames. | Test Note |
| |―――3.5 - DUT Locate_Fault Response, Both Ports Up (Cable E) | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――Set Supervisor Ring State to Fault | Set Emulated Main Supervisor Ring State to Fault. | PASS |
| |―――――Wait 100ms | 100ms | PASS |
| |―――――SendLocateFault | Sent Locate_Fault | PASS |
| |―――――SendNeighborCheckRequest | Sent Neighbor_Check_Request out both ports. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――Set Supervisor Ring State to Normal | Set Emulated Main Supervisor Ring State to Normal. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_5_CableE.pcapng | PASS |
| |―――――AnalyzeResults | PASS | |
| |―――――――Neighbor_Check_Request | Observed 1 groups of Neighbor_Check_Request frames which matches expectations of 1 groups of Neighbor_Check_Request frames. | Test Note |
| |―――――――Neighbor_Check_Request | Neighbor_Check_Request frames in group starting at Sequence ID 0x10 use different Source Ports. | Test Note |
| |―――――――Neighbor_Check_Response | All Neighbor_Check_Response frames (Count: 2) matched with Neighbor_Check_Request frames. | Test Note |
| |―――3.6 - DUT Locate_Fault Response in RING_NORMAL | PASS | |
| |―――――Main Supervisor Enable | Enabled Emulated Main Supervisor. | PASS |
| |―――――StartCapture | PASS | |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――SendLocateFault | Sent Locate_Fault | PASS |
| |―――――SendNeighborCheckRequest | Sent Neighbor_Check_Request out both ports. | PASS |
| |―――――Wait 1s | 1000ms | PASS |
| |―――――VerifyRingState - Ring (1) and Normal (0) | Network Topology = 1, DLR Network Status = 0, Active Supervisor Address = 192.168.1.223, Last Active Node Port 1 = 0.0.0.0, Last Active Node Port 2 = 0.0.0.0 | PASS |
| |―――――StopCapture | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_6_Locate_Fault_RingNormal.pcapng | PASS |
| |―――――AnalyzeResults | PASS | |
| |―――――――Neighbor_Check_Request Frames | No Neighbor_Check_Request frames sent by the DUT in in response to Locate_Fault in RING_NORMAL state. | Test Note |
| |―4 - DLR Supervisor Capable Node Tests | PASS | |
| FinallyRoutine | N/A | |
| |―Pcap Cleanup | Pcap data saved in C:\Users\kmichel\Desktop\DLR_Test\DLREmulated_3_6_Locate_Fault_RingNormal.pcapng | PASS |
| |―TestCleanup | Disabled Emulated Main Supervisor at 192.168.1.223. Disabled Emulated Backup Supervisor at 192.168.1.111. | PASS |
| |―RestoreTimerResolution | PASS | |
| |―RestoreSupervisorConfig | PASS |